跳至内容
Python 俱乐部
用户工具
登录
站点工具
搜索
工具
显示页面
修订记录
反向链接
最近更改
媒体管理器
网站地图
登录
>
最近更改
媒体管理器
网站地图
您的足迹:
hardware:router:tl-wr703n-ddwrt-openwrt
本页面只读。您可以查看源文件,但不能更改它。如果您觉得这是系统错误,请联系管理员。
====== TP-Link TL-WR703N 刷DDWRT,OpenWRT====== ===== 在DDWRT基础上刷OpenWRT ===== USE THESE INSTRUCTIONS AT YOUR OWN RISK I have only done this procedure once and sharing because of the lack of information on the web on how to do this. Some of the sellers of the TL-WR703N are shipping the routers with DD-WRT pre-installed – some with a Chinese interface, some with an English interface. Regardless, you need telnet or SSH access to the router as upgrading via the web interface will not work. ==== Step 1 : ==== Get the OpenWRT image onto the router. e.g. <code> root@DD-WRT:/tmp# wget http://192.168.1.142/openwrt/ar71xx/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin Connecting to 192.168.1.142 (192.168.1.142:80) openwrt-ar71xx-gener 100% |*******************************| 3840k 0:00:00 ETA </code> Other methods can be found here :- http://wiki.openwrt.org/doc/howto/generic.sysupgrade ==== Step 2 : ==== The TRICK is that the partition names are different between OpenWRT and DD-WRT. Whereas all OpenWRT instructions will tell you to write to the ‘firmware‘ partition, this does not exist on DD-WRT and you have to use the ‘linux‘ partition instead. Use the ‘mtd’ command as per the example below to write the OpenWRT image onto the router. Note the ‘-r’ argument will reboot the router as soon as the flash is complete. (As usual, do not power off or disconnect during the flashing!). <code> root@DD-WRT:/tmp# mtd -r write openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin linux Unlocking linux ... Writing from openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin to linux ... [e] Connection closed by foreign host. </code> ===== 参考 ===== * http://www.madox.net/blog/2013/03/10/how-to-install-openwrt-on-a-tl-wr703n-that-came-with-dd-wrt/
hardware/router/tl-wr703n-ddwrt-openwrt.txt
· 最后更改: 2014/11/14 03:14 (外部编辑)
页面工具
显示页面
修订记录
反向链接
回到顶部